Who let the dog,now with pic's page 4
#111
Board Regular
Join Date: Jun 2006
Location: Rockwall,Tx
Posts: 477
Originally Posted by BigDiesel
Originally Posted by SteveBooth
Originally Posted by BigDiesel
Originally Posted by SteveBooth
I get a million calls for $.80 cents per mile loads, and take every one I can get.
And you would be able to do better out of Ma.?
__________________
Keep right,Pass left
#113
Senior Board Member
Join Date: Oct 2006
Location: Hinges of HELL!!
Posts: 878
Originally Posted by DD60
Originally Posted by BigDiesel
Originally Posted by SteveBooth
Originally Posted by BigDiesel
Originally Posted by SteveBooth
I get a million calls for $.80 cents per mile loads, and take every one I can get.
And you would be able to do better out of Ma.? tootie
__________________
Never pis$ off anything that can bleed for 5 days without dying. Adopt a Minpin minpinrescue.org
#116
Senior Board Member
Thread Starter
Join Date: Mar 2007
Posts: 1,009
9200,
If you could, that would be great, I am going to do it when I go home. Don't jinx me on that trailer passing me thing,...everything else on the road already does just that. I think I've passed three vehicles in 2,000 miles,...basically I drive like a big freakin' white turtle. Steve, The LAST thing I need is a CB, all I would hear is "come on doghouse move that thing" I guess you passed me while the weather was still rainy but good?? It's suckin' big right now, and I have 350 miles to go before 2 p.m. Friday. Also as a side note, today my grill froze over and started to overheat my truck, and now my speedo, and tach are on the fritze,..I'm useing the Garmin as a speedo.
#117
Member
Join Date: Jan 2006
Location: Mid Michigan
Posts: 155
Dog House when you get home I try to get you any info you need off my hand brake. On the speedo maybe the speed sensor on the back of the transmission is loose. It has a couple wires and it is about 3/4" in dia. I think it works like a magnetic pick up It is right in front of the yoke. It has to be a certain distance from the inside of the yoke but not touching it and it has a jam nut on it. I think it is less that .06 gap but not sure.
Mike
#118
Senior Board Member
Thread Starter
Join Date: Mar 2007
Posts: 1,009
9200,
here is how it happened, see if this sounds like anything? 1.Tach went out 2.Speedo went out a half hour later 3.turn off the key/turn on the key, both of them zero out and then swing all the way to the right, and then swing back to zero 4.Cruise control still works :? This truck is at least entertaining!!
#120
Senior Board Member
Thread Starter
Join Date: Mar 2007
Posts: 1,009
First run down second one up.
DH 58 miles to New Bedford MA, load up a 44' long 100" wide 10 ton boat trailer New Bedford To San Diego,..... $1.58 per mile on 3,158 (includes DH) Plus $400 extra (negotiated after the rate conf. was signed :wink: ) for loading and unloading (they need me on both ends) $5,400 Delivers anyday I decide as long as its before Friday. Got my tach/speedo back, and now I'm heading South the Dog is a happy trucker.I got to see my first "bird" today,...on the streets of New Bedford,...it was kind of fleshy colored and limp :roll: |

