User Tag List

Reply
 
LinkBack Thread Tools
  #1  
Old 02-26-2007, 04:39 PM
rank's Avatar
Senior Board Member
Thread Starter
Join Date: Oct 2006
Posts: 2,079
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Default using truck compressor to inflate tires???????

I think I read that someone on this board rigged up a deal that would allow him to inflate truck tires on the side of the road using the truck compresor?

Anyone got any info on how I might do this?
Reply With Quote
  #2  
Old 02-26-2007, 04:57 PM
Dispatch_This's Avatar
Member
Join Date: Jan 2007
Location: Barstow, CA.
Posts: 141
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Default

You can buy 50' airhose with a gladhand connector at any large truckstop. I put a quick-release connector on the other end. You can snap a tire chuck in, and your good to go. It will also work with a variety of air powered tools that you might want to keep on the truck.
__________________
---------------------------------------------------------------

"That 'gator is here, somewhere..."
Reply With Quote
  #3  
Old 02-26-2007, 06:14 PM
Guest
Guest
Posts: n/a
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: Post(s)
Tagged: Thread(s)
Default

I use that hose all the time and it works great. It's a little hard to connect and disconnect but it works like a champ!!
Reply With Quote
  #4  
Old 02-26-2007, 08:57 PM
Maniac's Avatar
Senior Board Member
Join Date: Sep 2004
Location: Northeast
Posts: 1,092
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: Post(s)
Tagged: Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Default

Look here

http://www.iowa80.com/iowa80/shop?me...t&prodid=01000
Reply With Quote
  #5  
Old 02-26-2007, 09:01 PM
marcel27208's Avatar
Senior Board Member
Join Date: Aug 2006
Location: salisbury,NC
Posts: 1,045
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: Post(s)
Tagged: Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Default

yeah they work great except for the air chuck itself, ive bought to airlines and chucks from the wilco the past 6 months, but i bought an air chuck from truck pro and that thing is heavy duty!!!!!
Reply With Quote
  #6  
Old 02-26-2007, 09:55 PM
Guest
Guest
Posts: n/a
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: Post(s)
Tagged: Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: Post(s)
Tagged: Thread(s)
Default

I used mine once when it was like 0 degrees out and the hose was hard as a rock. I tried to uncoil it and it was icy out. It dragged me back every time I tried to reach the trailer wheels. :lol: It was pretty funny.

What I plan to do is buy some compressor hose and run it down both sides of the trailer with quick connect fittings. I'll put 4 quick fittings on. 2 on the rear and 2 on the front. Then I can walk around with a short 6 footer and hook up to the connectors and reach all 18 wheels without having to wrestle with that plastic hose!
Reply With Quote
  #7  
Old 02-27-2007, 01:09 AM
Sonny Pruitt's Avatar
Board Regular
Join Date: Sep 2006
Location: Mahwah,NJ
Posts: 450
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: Post(s)
Tagged: Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: Post(s)
Tagged: Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Default

Psssst......,
,
,
,
,,

,
,
,
,




down here
there already is an air line going down the length of your trailer

:roll:
Reply With Quote
  #8  
Old 02-27-2007, 01:22 AM
sidman82's Avatar
Senior Board Member
Join Date: Jun 2006
Location: Long Island, NY
Posts: 532
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: Post(s)
Tagged: Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: Post(s)
Tagged: Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Default

What he is trying to say is tap into any air tank or air line on your truck or trailer. Take out the plug on any air tank and put a ball valve with a quick connect. Put one on the trailer air tank and one on the tractor air tank. Use a short hose that is carried in your tool box and fill any tire up. It is also good for bleeding out your air tanks to get out the moisture, Make sure you use a plug on the bottom of the tank if you have one. Hope this helps. 8)
Reply With Quote
  #9  
Old 02-27-2007, 03:19 AM
rank's Avatar
Senior Board Member
Thread Starter
Join Date: Oct 2006
Posts: 2,079
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: Post(s)
Tagged: Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: Post(s)
Tagged: Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Default

That was it. Thanks for the replies.
Reply With Quote
Reply






Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT. The time now is 12:15 PM.


User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.