[gmh]

The band type load seals are easy enough to break. But how does one break those bolt type load seals?

I refuse to answer how I did it earlier today. But I know there must be an easier way.

[Uturn2001]

Bolt cutters.

Originally Posted by Uturn2001

Bolt cutters.

+1

[flood]

+2 their bolt cutters

[gmh]

Bolt cutters, eh? I thought were only useful for borrowing other driver's load locks. Learn something new every day.

[Chasing Daylight]

Bolt cutters will work in a pinch. But most receivers use a die grinder. As a rule high security seals shouldn't be removed by the driver... they get a bit ticked at you if you do remove them.

[Rockee]

I think in my years I have only had those cut with a die grinder maybe once or twice, only because me or the receiver didnt have bolt cutters.

[mikey4069]

Originally Posted by Chasing Daylight

Bolt cutters will work in a pinch. But most receivers use a die grinder. As a rule high security seals shouldn't be removed by the driver... they get a bit ticked at you if you do remove them.

yea in a pinch bolt cutters. :lol: die grinder i have never had a rec use one on a bolt seal . :roll:

[Uturn2001]

Originally Posted by Chasing Daylight

Bolt cutters will work in a pinch. But most receivers use a die grinder. As a rule high security seals shouldn't be removed by the driver... they get a bit ticked at you if you do remove them.

A driver should never remove any kind of security seal without permission. With that said I have had to remove bolt seals many times over the years. While considered a "high security" seal I have had them placed on trailers with cargoes as common as toilet paper and canned food items.

[vavega]

Originally Posted by gmh

I refuse to answer how I did it earlier today. But I know there must be an easier way.

let me guess. you took a screwdriver, held it against the bolt, bracing it against the door and then banged away at it with a hammer? :P muttering and cursing under your breath and then finally outloud when it took forever and you cracked the plastic on the scewdriver handle? ops: