Quick and easy laptop desks- freightliner/flattish dash
#11
07-19-2008, 10:54 PM
Excellent idea Rev.
 I think I found the same stand at zZounds. http://www.zzounds.com/item--JSTMS200 I shop online music stores all the time, and never thought of this. Thanks ...and I apologize for always thinking yer a Horses ass. (not that there's anything wrong with that...)  ops:
__________________
#12
07-20-2008, 05:01 AM
Originally Posted by roadhog
Excellent idea Rev.
I think I found the same stand at zZounds. http://www.zzounds.com/item--JSTMS200 1. You'll have to cut the neck down to make it shorter. Even with the adjustments all the way down, it is still quite a bit too high. Just pull the neck out, and hack the thing off, then put it back together. 2. You might have to trim the table where the laptop sits, depending upon what type of truck it is going into. In my 379, I had to cut about 1 inch off of the side closest to the dash.
#13
07-20-2008, 06:09 AM
Originally Posted by Rev.Vassago
Or you can just buy a music stand, and save the hassle of building a system:
 Two zip ties hold it in place, and it takes all of about 5 minutes to install or remove. Plus, it's adjustable.
__________________
Don't trust anybody. Especially that guy in the mirror.
#14
07-20-2008, 06:22 AM
Originally Posted by Jumbo
What's the milk jug for? Urinal.
#15
07-26-2008, 06:40 AM
stand
what type of laptop does it come with !
ha ha great tip guys been trying to come up with something cheap for my laptop really like the stand ideal hadn't thought of that Nice
__________________
Keep the greasy side down and the shiny side up |
