User Tag List

Reply
 
LinkBack Thread Tools
  #1  
Old 02-21-2009, 03:18 PM
allan5oh's Avatar
Senior Board Member
Thread Starter
Join Date: Aug 2005
Location: jackassville (winnipeg, mb)
Posts: 3,280
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Default Talk to me about tarps

Payne lent me some tarps, but they're not very good. Some have too many holes and they're not the right size. Four piece system, and I think only the rear end tarp is the right size. Has to be 342" to cover a legal 13'6 load and the two middle pieces are around 320". My deck height is 42". So 120 for one side, 102 for the top, and 120 for the other.

Anyways, what kind of tarps should I look at? I prefer something light in weight yet strong. I'd like a four piece system like what I have, but more flexible. I have a load of spools on and the tarps I have just don't work, not enough rings.

I was thinking of getting the four piece system, plus a smoke(the one I have is good though, maybe I should keep it) and also getting two small ones 12 feet 15 feet long with a one foot flap for grader blades. That would work real nice. The tarps I have are too wide and not really long enough for blades.

What do you folks think? Any websites that will help me out? What kind of money are we talking here?

Last edited by allan5oh; 02-21-2009 at 03:20 PM.
Reply With Quote
  #2  
Old 02-21-2009, 04:54 PM
Jumbo's Avatar
Senior Board Member
Join Date: Aug 2006
Location: Northern Wisconsin
Posts: 2,096
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Default

We carry a 2 piece set of lumber tarps with 5 rows of d rings and I haven't had anything yet that I cant cover with them. I also do carry a pair of 14'x14' steel tarps for coils or really small stuff that needs to be covered. I have used the lightweight and the older heavier sets we have and they both have their advantages. If you have a set made spend the extra money for one or two additional rows of d rings.
__________________
Don't trust anybody. Especially that guy in the mirror.
Reply With Quote
  #3  
Old 02-21-2009, 05:12 PM
allan5oh's Avatar
Senior Board Member
Thread Starter
Join Date: Aug 2005
Location: jackassville (winnipeg, mb)
Posts: 3,280
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Default

That's definitely what I need, more rings!
Reply With Quote
  #4  
Old 02-21-2009, 07:26 PM
Maniac's Avatar
Senior Board Member
Join Date: Sep 2004
Location: Northeast
Posts: 1,092
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Default

Look here






DS-Sewing truck tarps covers and accessories for truck fleets and independent owner operators.

Harps Tarps - Flatbed Tarps, Dump Truck Tarp Systems, Nursery Tarps, Sun shield Tarps, Awnings, Custom Industrial Tarps

Zamzow Manufacturing Company

lumber tarps - Welcome - Sioux City Tarp, LOWEST PRICES

Tarpstop® LUMBER TARPS - Lightweight and Heavy-Duty Flatbed Truck Tarps
Reply With Quote
  #5  
Old 02-22-2009, 04:32 AM
rank's Avatar
Senior Board Member
Join Date: Oct 2006
Posts: 2,079
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Default

3 pcs should be plenty. One for the upper deck + 2 for the lower. Make sure each piece is long enough to overlap the other one at least a foot.
Reply With Quote
  #6  
Old 02-24-2009, 05:57 PM
allan5oh's Avatar
Senior Board Member
Thread Starter
Join Date: Aug 2005
Location: jackassville (winnipeg, mb)
Posts: 3,280
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Default

I talked to the shop manager at my company today, he is a fantastic guy. Gave me a sheet of the dimensions I wanted. He said go with at least a 4 piece system with the types of loads we do. He also said it's best to go with 8 foot centers, and have 2 foot D-rings. That gives 5 rows of d-rings for the larger tarps, and 4 for the front tarp, plus the grommets at the end. He said make sure you get d-rings, not the other sown in grommets.

Anyways the sheet he gave me shows:

Front 14x25 with 8 foot drops, 9 foot front flap that's 12 feet wide, 4 rows d-rings on sides, 3 rows on front.

Middle two tarps 16x28 10 foot drops 8 foot center, d-rings every 2 feet that makes 5 rows plus the bottom grommets.

Back tarp 14x28 10 foot drops 8 foot center, d-rings every 2 feet 5 rows just like the middle ones. 11 foot flap I think that's 12 feet wide(it's cut off in the copy) with 5 rows of d-rings just like the sides.

Sounds pretty large to me, but it will work. Total cost is $2100 Canadian. I should call them to see if this price is still valid.
Reply With Quote
  #7  
Old 02-27-2009, 07:05 PM
steelhauler's Avatar
Rookie
Join Date: Dec 2008
Posts: 37
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Default

no matter if you have d-rings(I prefer) or grommets, make sure you find out how close together normal configuration is. I bought a set of steel tarps a few years back and got a deal on a "left over" set. Problem is the grommets are so far apart that really, unless you strap over a load, its flapping 100 mph.
Reply With Quote
  #8  
Old 02-28-2009, 09:17 PM
YerDaddy's Avatar
Board Regular
Join Date: Mar 2008
Location: @ my keyboard
Posts: 226
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Default

Quote:
Originally Posted by steelhauler View Post
no matter if you have d-rings(I prefer) or grommets, make sure you find out how close together normal configuration is. I bought a set of steel tarps a few years back and got a deal on a "left over" set. Problem is the grommets are so far apart that really, unless you strap over a load, its flapping 100 mph.
Adding grommets is one of the easiest things you can do to a tarp. Just get a grommet kit with a hole punch and dies. Boat supply sites have the best selections of grommets, snaps, material etc.
__________________
The reason I'm a narcissist is cause everyone else is so lame.
Reply With Quote
  #9  
Old 03-12-2009, 11:13 PM
INKTOXICATED's Avatar
Member
Join Date: Oct 2004
Location: CENTRAL JERSEY
Posts: 179
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Default

ugg tarps... some of the tarps on our loads are 48 feet long and sort of a cloth like viynl. when these things get rained on it soaks it up like a sponge and the thing literally weights a ton. funny thing is the rain gets right thru it so the tarp really does nothing other then beat me up wrestling with it. most of them have the rings ripped outta them so u need to pinch some trap between the rub rail and the strap so it wont blow all over the place. when i see a load with those tarps rolled up wiaitng to go on ill do my best to sneak outta there without tarping at all.
Reply With Quote
  #10  
Old 03-19-2009, 01:29 PM
heavyhaulerss's Avatar
Senior Board Member
Join Date: Jan 2007
Location: north alabama
Posts: 1,200
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Default

try this co. thay seem to have great prices Coil Tarps 6' x 6' x 5' - $95.00 : Mytee Products
Reply With Quote
Reply






Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT. The time now is 03:36 PM.


User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.