Trucker Forum - Trucking & Driving Forums - Class A Drivers

Trucker Forum - Trucking & Driving Forums - Class A Drivers (https://www.classadrivers.com/forum/)
-   Truck Maintenance (https://www.classadrivers.com/forum/truck-maintenance-26/)
-   -   Starting problems (https://www.classadrivers.com/forum/truck-maintenance/33366-starting-problems.html)

bob h 04-10-2008 08:00 AM

[quote="flood"]well check the oil level, check the water level. if it's to low that will kill it.


That won't kill it 2-3 secs after it has started

bob h 04-10-2008 08:02 AM


Originally Posted by pdm
There should be a wire directly from the batteries to the ecm & also might have a fuse in the battery box. make sure the wiring is ok. If its bad it won't run, but i don't think that the engine lights on the dash will power up either.......


There is 5 wires to the ecm, 3 ground and 2 live.

bob h 04-10-2008 08:03 AM


Originally Posted by Collard Greens
flood how dry out the moisture? oh5 you mean the fault codes, if so I says no fault codes.


How are you sure there's no codes?


All times are GMT -12. The time now is 02:25 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved