Quote:
Good luck! |
Thanks for all the info! This is far by the best forum to get advice from and I do appreciate it! I start with Maverick on the 6th of this month and looking forward to it.
|
Quote:
|
Quote:
You don't have to be an ass driver! |
I pull both flats and dry vans. My company has both.
I started out with vans, did that for awhile. I just recently (year and a half) have been doing flatbed work too. I see flatbedding as a challenge, which I like, after pulling vans for so long. You will get dirty, and it is more physical work. It can be downright dangerous, since there will be times when you have to climb up and down off the trailer, and the load, to drape your chains and/or tarps. It's a long way to the ground if you slip and fall! Strap only loads are much easier to secure. There is much more to know in regard to DOT requirements for securing different types of loads. Tarping is like an art form, and is the hardest thing to learn, in my opinion. I'm still learning! I had an odd shaped load a few weeks ago, and it took me an hour and a half to tarp it properly. It's not as bad as one might think. Working out in the elements sucks, but one thing that wasn't mentioned here, was that at some shippers and receivers, you will be working indoors as they load or unload you. At some companies, you pull inside their building to load or unload. Many of these places use an overhead crane to load you. Most will give you time to secure and tarp inside the loading bay. I think it might be overwhelming for a new driver, like SMB, to get into trucking with flatbeds first. It's hard enough as a newbie to just drive the truck safely, let alone worry about cargo securement, tarping, etc. I guess that with good, quality training, it could be possible for a new driver to do the job well. Just my 2 cents. Best of luck to you SMB! |
A lot is said about DOT requirements, and I do believe that everyone should, at least, follow those. After working their and seeing what other company's do I know for a fact that Maverick's securement policies are the best in the business. Follow what you are taught and you will never have any problems. Take shortcuts and you will probably regret it one day. There's no reason why you can't do the job quickly and still be 100% certain that you are secure. It shouldn't takea driver more than a couple of minutes to figure out exactly what he needs and to be certain about that. The job of actually securing the freight gets easier and quicker with repetition. Flatbedding is probably not a job for the person who is indecisive and unsure of themself. I'm not saying that you should not be cautious and be reckless, but there is a big difference between a reckless person and one who works quickly.
As for tarping, the method that Maverick teaches is also the best, IMO. I will say that a lot of it has to do with the tarps that they use. Most companies use a much lighter tarp that has a tendency to break loose in spots and flap in the wind. The number one key to tarping any load, and you will be taught this in Maverick securement class, is to remember that all loads are square. Is that coil round? No it's square when it comes to tarping it. If you start out with 4 corners and work from there you will get a much prettier finished product that will not break loose and you will be able to do it more quickly every time. |
I'm in Maverick's securement training program now. What redsfan is saying is very true. They have great trainers and techniques. From what I understand, even the DOT has sent some of their people here to be trained on proper securement techniques. That says alot about Maverick's ability to train drivers. They also show you ways to speed up the tarping and securement process.
This company has impressed me and everyone in my group at orientation a lot. |
Youll need a hardhat and good gloves...youll go to a lot of nasty dirty noisy warehouses with lots of dust and no bathroom within reasonable distance.
They say people treat you better is you flatbed, but i didnt see that, maybe when you deliver at construction sites or small businesses...Im a perfectionist, so I used to spend too much time securing and not enough time racking up miles when i went flat.... |
Pulling flats is the most interesting side of trucking...you guys did not even mention the positives like:
No lumpers or leaches! No union docks in NYC! Someone is always waiting on the flatbed load to show up..usually no wait to unload. I never had a 4 am appointment at Albertson's in Katy Texas with a flatbed. I hauled some interesting stuff...and it was never dull! Tarping in the wind sucks bad, tarping in the heat sucks bad, tarping in the cold sucks bad....it all sucks, but it works out in the end, long as you don't fall off the tall load, in the wind, and a truck stop shower is close. I did spend 2 hours securing and tarping a load once...a printing press, going to a museum...and yes, it took awhile to figure out how to hold it down without damaging it. And finally, you will notice every other skateboard on the road and try to guess what they are hauling if you can't tell from the shape of the tarps.... |
All times are GMT. The time now is 07:20 PM. |
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.