Quote:
Originally Posted by dle
Phantom,wsyrob
would you mind sharing photos of your mechanical wizardry.
I posted a couple of pictures above. Its all made out of 1/2 inch threaded pipe, elbows, and flanges you can buy at any hardware store. You can buy the pipe in any length already threaded from 1 inch up to 10 feet. My set up is a flange bolted to the seat bolt. 2" pipe, quick disconnect fitting, 10 inch pipe, 90 degree elbow, 10 inch pipe, 90 degree elbow, 4 inch pipe, flange attached to the Plexiglas holder. You could use a piece of plywood and get it all from the hardware store.
below is a picture of a leftover pipe and a 45 degree elbows I didn't use.