Quote:
Originally Posted by fdmax
yeah, i just measured mine,
three inches,
and that would need a small arm,
my hand fits in snugly.
Me and my Dad had ours drilled for APU's
bad part was i was'nt there when they drilled
i do have some bits of shavings in my tank, but not very much.
but to think about the drilling, normally most of the aluminum is pulled up while drilling
and the fuel is not sucked at the bottom of tank
there is a tube that goes down thats a few inchs from the bottom.
I called tony at black rock apu
and he said 99% of the shavings come back up with the drill bit.
Hey, I really appreciate you making that call. What you're saying makes sense and all, I was leaving it to the better judgment of the mechanics. They're still saying to bring it back in with low tanks (they'd actually pull the tanks, and I don't know how they'd wash them).
I guess I'm done here, it's a company shop. Low rates, but what good is that if you have to go someplace else anyway. They started taking apart my door to replace the hinge and got to a place where they couldn't get a part off. The solution? Put it back together like it was before and charge me for their efforts. I guess I'll just try to find someone else to do it.
Thanks, fdmax