Trucker Forum - Trucking & Driving Forums - Class A Drivers

Trucker Forum - Trucking & Driving Forums - Class A Drivers (https://www.classadrivers.com/forum/)
-   New Truck Drivers: Get Help Here (https://www.classadrivers.com/forum/new-truck-drivers-get-help-here-102/)
-   -   Swift ??????? (https://www.classadrivers.com/forum/new-truck-drivers-get-help-here/26015-swift.html)

goodfella 03-31-2007 07:24 AM

Swift ???????
 
I leave this coming tuesday for the Swift school. What can I expect? School, Training, going solo, ect....

Thanks For Your Help.
Goodfella

Uturn2001 03-31-2007 10:42 AM

Expect nothing and then you will not be disappointed. :P

devildice 03-31-2007 10:43 AM


Originally Posted by Uturn2001
Expect nothing and then you will not be disappointed. :P

:lol: :lol: good one

Malaki86 03-31-2007 10:50 AM

Re: Swift ???????
 

Originally Posted by goodfella
I leave this coming tuesday for the Swift school. What can I expect? School, Training, going solo, ect....

Thanks For Your Help.
Goodfella

Leaving in just a few days and just now asking about them? Heh - you'll have a blast...

Trubbledog 03-31-2007 11:11 AM

Hit the search button at top of page, then type " swift and school " in the search query box. Good luck to you.

shyykatt 03-31-2007 12:02 PM

like any of the schools, expect to take in a lot of info & work hard- ask lotz of questions. good luck to ya.

rickstephens 03-31-2007 03:10 PM

or u could just give me a call dude ill tell u like it is way to much to type i went to there school and now im solo just putting in the time and btw to move on to better things i sent u a pm with my number if u want to know i will tell u like it is good or bad

silvan 03-31-2007 05:26 PM

Re: Swift ???????
 

Originally Posted by goodfella
I leave this coming tuesday for the Swift school. What can I expect? School, Training, going solo, ect....

You can expect to drive a slow a$$ truck and earn $4.44 a mile. All the Swift drivers I know earn $4.44 a mile.

Have fun!

03-31-2007 05:30 PM

Where's Rokk? :?:

fatman 03-31-2007 11:17 PM

Check this out: http://www.classadrivers.com/phpBB2/...hlight=#209012

NevadaJim 04-02-2007 05:30 PM

Fatman,

Read the link to your previous post. Let's say you're 1,000 miles away from home and you absolutey can't take any more of the mentor you're with. You said to get off the truck. What's Swift's procedure for requesting a different mentor? Obviously, someone isn't going to just bail out 1,000 miles away, and I doubt Swift will route the truck back just to change mentors (or will they?). I hope like hell I don't end up with some slob or f'up for 6 weeks...that's really my biggest concern going with these guys. Just curious how they handle a request to change mentors.

Thanks,

Jim

jnk2001 04-02-2007 06:13 PM


Originally Posted by fatman


Fatman, you still with swift? and are you still liking it?

fatman 04-06-2007 01:04 PM

Hey guys, sorry for the late response been out of town doing paperwork for my new gig with the Red Cross.
Jim, to get a new mentor I believe all you got to do is contact your driver manager. Good luck getting in touch with him/her though. Personally I'd wait till I got to a terminal and then have a frank conversation with the trainer, say 'I'm sorry, this just isn't working out. I think I'd learn more with someone else.' Then unpack my gear and talk to my driver manager or failing that the local safety director. I think the SD is the first link in the chain of command in that situation if you can't get in touch with your DM. They'll put you in a hotel till they can route a new trainer to you. May take a few days but better than 6 weeks of hell.

No, not with Swift anymore. I was constantly putting in application for local jobs the entire time I was with them. I got real blessed and found an awesome job that pays much better and allows me plenty of home time. My plan had been to stay with Swift for a year, but I just couldn't take it anymore. I was lucky to average 350/miles a day because my truck kept breaking down.
For instance, I got a sweet run to Seattle from Laredo. Another driver tells me I need chains to go through OR/WA. The Phoenix terminal is out of chains. I spent four hours looking for chains. Then Swift takes it out of my paycheck and says they will reimburse me later (they did). Then my brakes start acting weird around palm springs. I go to the Fontana terminal, they say there isn't a problem (I had to wait 24 hours for that reply.)
So I'm coming off the final leg of the Grapevine, Jake brake on and stabbing real light, like maybe two seconds on, 5 seconds to cool. I see black smoke coming from my brakes. On my way to a mechanic to check that out my right hood mirror falls off!
So another 24 hours down. And of course I'm not getting any breakdown pay. Sure, they say you'll get it but that's BS.
I finally get to Seattle. On the way back what I think is my tire rod breaks; my rig would shake over 45 MPH. Now I'm just past Fontana when this happens, should I go back? Probably. The problem is that I couldn't find any mechanics at the Fontana terminal who were proficent enough in English to where I felt comfortable with our communication. So I limp into Phoenix.
They tell me it'll be 3 days minimum before they can even look at me. So I T-call my load and have a vacation (sarcasm). 5 days later my rig is back up. I am now like 18 days or something past my original home date request. I ask for a load heading to Mobile.
They try to send me to Minersberg, PA (or something like that).
I explain that that is not acceptable; my son's birthday is coming up and I am running out of blood pressure medicine. And that if they had honored my original request this wouldn't be an issue. (They had done this before, ask to be out for anything less than 3 weeks and they 'misplace' your request.)
I sit on my fat ass for a few hours, still not making any oney or getting closer to home, and they try to send me to North Carolina.
I finally lose my cool and ask them if they have anything going down I-10. I'll even take two seperate loads, just move me in the direction I want to go. They say take the NC run, we'll work it out.
I tell them that this relationship is not working out for me and I'll be catching a bus. Who do I need to turn my truck in to? Then they get pissy and say the reason I'm not making any money is because my truck hasn't been moving for nearly a week. I nearly laughed.

So I left Swift and very luckily got my current job soon after. The money was ok when I was running. The hometime was a major problem because I felt I was just being flat out lied to. That really pissed me off.

So that's bitch and moan, it's been told before and more entertainingly. I still say Swift is a good choice for those with limited options and trying to get in the door (i.e. you can't pay for trucking school and your credit is shot). But if you can get on with nearly anyone else, like Crete or Maverick, or even pay for school yourself, please do yourself a favor and go that route.

continental 04-06-2007 11:48 PM

2 seconds on and 5 seconds off? Of course you will smoke your damned brakes. Apply a steady pressure of about 5PSI all the way from the top of the
hill to the bottom and you will be OK! Was that the way Swift was teaching you to use the brakes?[/img]

Skywalker 04-07-2007 12:03 AM


Originally Posted by continental
2 seconds on and 5 seconds off? Of course you will smoke your damned brakes. Apply a steady pressure of about 5PSI all the way from the top of the
hill to the bottom and you will be OK! Was that the way Swift was teaching you to use the brakes?[/img]

While "stab-breaking" used to be the norm....and most companies taught that, its no longer the way it should be done and only because of the change in brake pad materials.... But if his brakes were smoking after 2 seconds.... even after the 4th or 5th stab....it sounds like he had a blown wheel seal leaking oil on the drums.

I pull a tanker with 45K lbs liquid in it, and I can use "stab breaking" all the time and not smoke the brakes. So its not that much of an issue. But normally on an even descent...a max of 8psi will hold the truck where you want it....if you are in the right gear and have your jakes on.

And, isn't it kind of humorous that so many people get on these forums and ask about how good Swift is..... :lol: :lol: :lol: :lol: :lol: I'll bet an "internet dollar" that within 24 hours....another potential victim says: I'm thinking about going with Swift, does anybody know anything about them?
:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:

fatman 04-07-2007 12:13 AM


Originally Posted by continental
2 seconds on and 5 seconds off? Of course you will smoke your damned brakes. Apply a steady pressure of about 5PSI all the way from the top of the
hill to the bottom and you will be OK! Was that the way Swift was teaching you to use the brakes?

Actually I think they said something more along the lines of 4 seconds on, 5 seconds off. I was halving the on time and relying on the jake more to try and prevent brake fade. Is my reasoning faulty?

Skywalker 04-07-2007 01:08 AM


Originally Posted by fatman

Originally Posted by continental
2 seconds on and 5 seconds off? Of course you will smoke your damned brakes. Apply a steady pressure of about 5PSI all the way from the top of the
hill to the bottom and you will be OK! Was that the way Swift was teaching you to use the brakes?

Actually I think they said something more along the lines of 4 seconds on, 5 seconds off. I was halving the on time and relying on the jake more to try and prevent brake fade. Is my reasoning faulty?

That depends.... Stab breaking used to be the standard, but that was when they used asbestos in the brake shoes. Now they are made of metallic or ceramic substances, which will not glaze as rapidly and can handle more heat buildup. When descending a steep grade.... do not use stab braking except to do a quick adjustment in downward speed. When you get down to the speed you want, put a maximum 8 psi on the brakes (according to your brake application air guage) and keep it on all the way down. Your brakes if properly adjusted should not smoke. But, what is more important is that you start down the grade in the proper gear to begin with. Either the same gear you climbed the hill with, or one lower, depending on the percentage of descent.....and of course your vehicle gross weight, and/or the posted speed limit on the descent. If you do it properly....you will not experience brake fade.

The problem was that many people would start down a slope too fast, stab brake for too long... 10-15 seconds then let off the pedal....allowing oxygen to get to the extremely hot linings....and that would cause a fire.
With constant pressure on the pedal....no oxygen. However if the descent is made too fast....and you end up smoking.... you had best be prepared to un-ass the tractor at the bottom of the descent with a fire extinguisher in hand and be ready to call 911. Slow and easy down a big hill is the only way to do it..... the only way. 8)

fatman 04-07-2007 02:07 AM

Thanks Skywalker, good advice there.

drivers*wife* 04-07-2007 08:03 AM

Here is my husbands Swift training story..........

He got his CDL a couple years ago and we couldn't afford a refresher course so Swift was his only option. Now he has half of his training in and 10 of those days he has spent sitting in terminals waiting for his truck to be fixed. He spent 6 days in Phoenix, a couple in Laredo, I don't know where else. He said their truck was losing coolant so they stopped and had mechanics look at it. It took 24 hours and all they did was fill the coolant up. The next day they were overheated at another terminal so they had it looked at again. Again the mechanic filled up the coolant and said it's fixed. Same thing the 3rd day and by now the trainer said he wants a loaner truck while his gets fixed. He was in Phoenix by the way. No loaners they said try tomorrow while we send your truck to Volvo. The next day they gave him a loaner with no AC. Take it or try again tomorrow. Well, they took it cuz the trainer had to get home withi a few days. They kept trying to send them to the NE when his home is SE. I'm tired of typing so I'll wrap this up......
it seems Swift is a good place to get your foot in the door, but PRAY your truck doesn't break down. It sounds like if you get a good truck they can keep you busy, I guess we'll see.

fatman 04-07-2007 02:15 PM


Originally Posted by drivers*wife*
....
it seems Swift is a good place to get your foot in the door, but PRAY your truck doesn't break down. It sounds like if you get a good truck they can keep you busy, I guess we'll see.

I don't want to alarm you, but have your husband get a Carbon Monoxide detector for his rig. I ran into about 3 or 4 guys who had CM problems at Swift. He probably will never have that issue, but I suddenly remebered it for some reason while readin your post.

drivers*wife* 04-07-2007 03:45 PM

thanks for that Fatman. I will let him know.

newolddrv 04-12-2007 03:29 AM

Down Time
 
I just finished my 6 weeks training at Swift. We were stuck at the beginning at Gary for 2 days trying to get the truck serviced and 2 new steer tires. Two weeks later we spent 2 1/2 days in Sparks. We took a 2 stop load to Portland jut to get out of Sparks. Part ot the deal was the promise of a good load. We got it too. Portland OR to Jacksonville Fl. Nice long haul.
The last week my mentor wanted to get some hometime before his vacation started. We both live in central Illinois and they wanted us to grab a load for Columbus, OH. They said they would TRY to get a load back home. Well, we dropped the trailer at the consignee and bobtailed home.
I have a couple of days home and Monday I go finish up at Gary and hopefully pick up a truck in Manteno, Il.

rickstephens 04-12-2007 04:29 AM

swift
 
well i see other drivers had the same problem i had tires not turning and sitting sitting and sitting plus home time yep going the other way you live thats why i had to leave i agree ok place to go to get cdl and some time behind the wheel like i said some time lol because trk wont run long enough to get alot of time btw or short miles to run. but if u have no other choice go there get threw the pain and get some where you will be happy and feel good about being a professwional driver. and after my short time with swifty im ready to go with a better co and hopefully better people. i have to add i too like fatman wanted to stick it out a yr, then that droped to 6 months , and finally had to leave after only 4 months. guess i will just have to make payments to them and i know for a fact they will at least take 80 a month he.. with the miles i was getting thats better than staying with them and paying what they were taking out of ck anyway. good luck to all that have to go with them just do your time and move on

newolddrv 04-12-2007 02:47 PM

Swift?
 
Well, I started with Swift and I just finished training. Six weeks on the road and everything is ok with me. Don't let the guys who never worked here let you influence your thinking. All training companies have thier shortcomings.
I didn't go through a school. I got my license working for a farmer and Swift was the only company that would hire me. Now that I have some over the road experience I know that I can do this job.
Don't let all the negativity from the would be drivers influence your thinking.

jegzus 04-12-2007 03:10 PM

Re: Swift?
 

Originally Posted by newolddrv
Well, I started with Swift and I just finished training. Six weeks on the road and everything is ok with me. Don't let the guys who never worked here let you influence your thinking. All training companies have thier shortcomings.
I didn't go through a school. I got my license working for a farmer and Swift was the only company that would hire me. Now that I have some over the road experience I know that I can do this job.
Don't let all the negativity from the would be drivers influence your thinking.

:lol: Keep thinking that way :roll:

newolddrv 04-13-2007 10:09 PM

Swift
 
I just got done with my 6 weeks training at swift. My mentor was a hard charger as far as getting loads and not sitting around. I wouldn't recommend running with an o/o because too many of them use the trainee for miles to make their truck payment. If your mentor is a company driver he is there to train.
I spent the last 30 days out on the road and I caught a cold. The last 3 weeks have been a bear but my mentor was going on vacation and I wanted to get this over with.
Don't believe everything on this board from people who know nothing about Swift except what they hear on the CB. All companies have their shortcomings. None are perfect. I went with Swift because I didn't go through a school. I got my CDL driving a grain truck for a farmer.
I now have experience driving in mountains and snow and other conditions. Now I have to go and finish up with a log class, final road test, and then get assigned a truck.
Swift gave me a chance....the rest is up to me.

fatman 04-13-2007 11:23 PM

Best of luck to you newolddrv. I hope you have a rewarding experience with Swift and come back to these boards to tell us so. Be safe!

rickstephens 04-14-2007 05:01 AM

swift
 
well new i did go to swift school the whole 9 yards u keep beleiving in swift no one gave them more chances than myself left me on the rd to starve 400 to 450 a week gross if u think thats good money then stay with swifty and make your 50 layover pay when u break dn and have to fight them for your money and dont spend all that 400 in one place because dude it cost alot to be on the rd even if u have a fridge. ive been around along time and they are the worst of the worst fatman has worked for them read his posts and look mine up post says all co cantrun like this so some of us has worked for them and we left for good reason ask yourself why are they the only co who took u

mudshark 04-27-2007 09:50 AM

I worked for Swift out of the Oklahoma City terminal for almost two years and thought I was treated fine. They're an awful big company, so you're basically just a number, but I was always treated with respect.

Any problems I encountered with Swift would have been there with any OTR company. I always rolled 2,500-plus miles per week.

Swift has a lot of drivers who have worked for them a long time, so they must be doing something right.

I went to work for Swift to get enough experience to find a local job, and that's exactly what I did. I yank tanks and haul fuel these daze. I'll always be grateful to Swift for letting me get my foot in the door.

BTW, if you ever need mechanical work on a Swift truck at Fontana, go to the Central Freight yard at Mira Loma. Swift has a much better shop there.

Good luck to ya. Let the Billy Bigrigs talk BS over the CB, keep yer mouth shut and drive, and you'll do just fine. It never ceases to amaze me all the misinformation I read about Swift.

msman 04-28-2007 03:48 PM

RUN As fast as u can AWAY From Swift they will tell u anything to get you there for your money!!!! i learned the hardway and i am still looking for work after almost a year


All times are GMT -12. The time now is 01:37 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved