Truck Driving Jobs

|

Trucking Jobs

|

Truck Drivers

|

Trucking Companies

                  Ban PanelBan Panel             
C12 Cat
Click here to go to the original topic

 
       Trucking Forums Message Board, Truck Drivers Forums - Forum Index -> Truck Maintenance
View previous topic :: View next topic  
Author Message
NascarFan



Joined: 18 Sep 2006
Posts: 307

Posted: Thu Oct 19, 2006 8:24 am    Post subject: C12 Cat  

Anybody have any thing good or bad to say about this engine. My boss is looking at truck that this engine it has about 225,000mi and 410HP the only thing he could find wrong with it is the rear seal was leaking but the dealer agreed to fix it.
Back to top  
bob h



Joined: 15 Oct 2006
Posts: 664
Location: Nb

Posted: Thu Oct 19, 2006 9:51 am    Post subject: Re: C12 Cat  

NascarFan wrote: Anybody have any thing good or bad to say about this engine. My boss is looking at truck that this engine it has about 225,000mi and 410HP the only thing he could find wrong with it is the rear seal was leaking but the dealer agreed to fix it.

They had some head gasket issues, with an updated bolt torque procedure. Also, that the low clamp force resulting from the "loose" headbolts would sometimes cause liner damage as well. SOME were known to lose their piston pin retainers and pile up the cylinder:(

...but, they ALL have issues, just that some have more than others ;0)

Overall, a pretty solid engine.
Back to top  
NascarFan



Joined: 18 Sep 2006
Posts: 307

Posted: Mon Oct 23, 2006 9:02 am    Post subject: Re: C12 Cat  

bob h wrote: NascarFan wrote: Anybody have any thing good or bad to say about this engine. My boss is looking at truck that this engine it has about 225,000mi and 410HP the only thing he could find wrong with it is the rear seal was leaking but the dealer agreed to fix it.

They had some head gasket issues, with an updated bolt torque procedure. Also, that the low clamp force resulting from the "loose" headbolts would sometimes cause liner damage as well. SOME were known to lose their piston pin retainers and pile up the cylinder:(

...but, they ALL have issues, just that some have more than others ;0)

Overall, a pretty solid engine.

Thanks for the info.
Back to top  
eurotrucker



Joined: 28 Aug 2006
Posts: 12
Location: Margaretville, NY

Posted: Sat Nov 18, 2006 6:07 pm    Post subject:  

It is excellent on fuel ! We have two Western star tri-axle dump trucks with C-12 and C-15 , if we are on the same job end of the day about
$20 different on fuel ( $2.49/gal) . 1 day-$20 5day-$100 you due the math.
Back to top  
solo379



Joined: 14 Feb 2004
Posts: 3132

Posted: Sat Nov 18, 2006 8:17 pm    Post subject:  

eurotrucker wrote: It is excellent on fuel ! We have two Western star tri-axle dump trucks with C-12 and C-15 , if we are on the same job end of the day about
$20 different on fuel ( $2.49/gal) . 1 day-$20 5day-$100 you due the math.

I bet, with the proper specs, i could get the same, if not better mileage from C-15!
But of course, if you put it to the floor on a both engines, C-12 is gonna be a winner! :P

Never have had C-12, but from what i've heard, it's the most troubled CAT OTR engine... :roll:
Back to top  
eurotrucker



Joined: 28 Aug 2006
Posts: 12
Location: Margaretville, NY

Posted: Mon Nov 20, 2006 2:53 am    Post subject:  

[quote="solo379"][quote="eurotrucker"]It is excellent on fuel ! We have two Western star tri-axle dump trucks with C-12 and C-15 , if we are on the same job end of the day about
$20 different on fuel ( $2.49/gal) . 1 day-$20 5day-$100 you due the math.[/quote]

I bet, with the proper specs, i could get the same, if not better mileage from C-15!
But of course, if you put it to the floor on a both engines, C-12 is gonna be a winner! :P

Never have had C-12, but from what i've heard, it's the most troubled CAT OTR engine... :roll:[/quote]

The truck I drove had 567K mile on it we don't have to many problem.
For as it is very dependable.
Back to top  
WreckInspector



Joined: 01 Mar 2007
Posts: 2
Location: East Central Illinois

Posted: Thu Mar 01, 2007 9:21 pm    Post subject: Known C-12 issues.  

Worked at a Cat TEPS dealer for truck engines.

C-12 is a good motor. Expect to do a head gasket and Cam/Followers between 750 and 1 million. These problems are common, ask around and you'll find out. Other than that, a good engine, the fixes are out so you will really only have to do them once.
Back to top  
Splitshifter



Joined: 19 Jun 2006
Posts: 637
Location: Right here

Posted: Fri Mar 02, 2007 6:01 pm    Post subject:  

The Co. I work for has a fleet of tri & quad axle dump trucks with Cat C12 engines.

They have proved to be very reliable & trouble free.

I might add that the company has a maintenance program that is very meticulous with oil & filter changes done on time, every time, and oil analysis.

I work in the shop, and drive them sometimes too, so I see both sides of the picture.

The C12 has good power & driveability too.
Back to top  
Bigmon



Joined: 13 Jan 2006
Posts: 686
Location: S. Cal.

Posted: Thu Mar 06, 2008 1:32 pm    Post subject: Re: Known C-12 issues.  

WreckInspector wrote: Worked at a Cat TEPS dealer for truck engines.

C-12 is a good motor. Expect to do a head gasket and Cam/Followers between 750 and 1 million. These problems are common, ask around and you'll find out. Other than that, a good engine, the fixes are out so you will really only have to do them once.


What would this cost to do?
Back to top  
 
       Trucking Forums Message Board, Truck Drivers Forums - Forum Index -> Truck Maintenance
Page 1 of 1

Powered by phpBB 2.0.22 © 2001,2002 phpBB Group



Trucking Companies | Trucking Job Search | Online Job Application | Trucking Links | Truck Drivers Message Board | Forum Archives | Contact Us | Site Map


Truck Driving Jobs © 2003 ClassADrivers.com
Web Design By CAD Website Design | CAD Enterprises LLC
 
New Users Register Free Account Here | Existing Forum Members Log In Here
Home | About Us | Contact Us | Testimonials | Spell Check

Class A Drivers.com

Application          Company Listings          Job Search        Load Board