Any Detroit mechanics out there?

[nitrohaulic]

I'm halfway through an inframe and the one torque spec I didn't get from my Detroit mechanic friend is the one for the wrist pin bolts. It's a 1997 12.7 liter.

[jdg]

Nitro,
I have the manual for an 11.7 DD 60 -1995
My info says that it is good for the 12.7 DD 60 as well.
If it helps, The torqe is 70-90 ft lbs, and it also says that the bolts are a "one time use" bolt, and not to reuse the old ones.
Hope this helps you out.

[bob h]

Nitro,
I have the manual for an 11.7 DD 60 -1995
My info says that it is good for the 12.7 DD 60 as well.
If it helps, The torqe is 70-90 ft lbs, and it also says that the bolts are a "one time use" bolt, and not to reuse the old ones.
Hope this helps you out.

As are many of the S60 bolts.

The 11.1L is a short-stroked version of the 12.7. The 14L has a larger bore.