User Tag List

Reply
 
LinkBack Thread Tools
  #1  
Old 11-22-2006, 12:57 PM
Papa Rick's Avatar
Board Regular
Thread Starter
Join Date: Sep 2006
Location: North Alabama
Posts: 476
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Default Rebuild or Buy New Engine

I have a 1985 Freightliner Day cab with a 350 big cam Cummings engine, mileage unknown, but will soon have to make a decision on to:

1. Rebuild
2. Buy a Used Engine
3. Buy a Rebuilt Engine

I haul logs for a living, longest radius I go one way is 150 miles, and avg 1500 to 2000 miles a week. The reason I am asking this question is the 350 seems to be losing some of its get up and go.

I know it has quite a few miles on it, but am unsure as to what would be my best route.
__________________
Be Kind To One Another, REMEMBER: You Reap What You Sow!
Reply With Quote
  #2  
Old 11-22-2006, 01:00 PM
Rev.Vassago's Avatar
Guest
Board Icon
Join Date: Apr 2006
Location: The other side of the coin
Posts: 9,368
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Default

Short answer - it depends. Have your mechanic look it over from top to bottom, and he should be able to tell you what the best route is.
Reply With Quote
  #3  
Old 11-22-2006, 01:08 PM
GMAN's Avatar
Administrator
Site Admin
Board Icon
Join Date: Feb 2005
Location: Tennessee
Posts: 17,097
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Default

I think having someone to check it out is a good idea. If it needs to TLC and you plan on keeping the truck, you may want to either rebuild the engine you currently have or buy a new one. Personally, I don't like the idea of buying a used engine. You never know what you are getting. You can do an oil analysis, inspection and dyno. That should give you the information you need to make a decision.
Reply With Quote
  #4  
Old 11-22-2006, 01:32 PM
PackRatTDI's Avatar
Senior Board Member
Join Date: Mar 2006
Location: Las Cruces, NM
Posts: 1,004
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Default Re: Rebuild or Buy New Engine

Quote:
Originally Posted by Papa Rick
I have a 1985 Freightliner Day cab with a 350 big cam Cummings engine, mileage unknown, but will soon have to make a decision on to:

1. Rebuild
2. Buy a Used Engine
3. Buy a Rebuilt Engine

I haul logs for a living, longest radius I go one way is 150 miles, and avg 1500 to 2000 miles a week. The reason I am asking this question is the 350 seems to be losing some of its get up and go.

I know it has quite a few miles on it, but am unsure as to what would be my best route.
If your engine does need a rebuild, it would probably be better to buy a reman/rebuilt unit. The downtime would definitely be less than waiting on a rebuild.
__________________
You can take the driver out of the truck but you cant take the truck out of the driver.
Reply With Quote
  #5  
Old 11-22-2006, 02:31 PM
GMAN's Avatar
Administrator
Site Admin
Board Icon
Join Date: Feb 2005
Location: Tennessee
Posts: 17,097
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Default

You will probably be down about 5 days or so if you do a rebuild, depending on availability of parts and scheduling. If you buy a remanufactured engine you could probably get turned around in 2-3 days.
Reply With Quote
  #6  
Old 11-23-2006, 12:53 AM
LOAD IT's Avatar
Senior Board Member
Join Date: Sep 2006
Posts: 725
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Default Re: Rebuild or Buy New Engine

Quote:
Originally Posted by Papa Rick
I have a 1985 Freightliner Day cab with a 350 big cam Cummings engine, mileage unknown, but will soon have to make a decision on to:

1. Rebuild
2. Buy a Used Engine
3. Buy a Rebuilt Engine

I haul logs for a living, longest radius I go one way is 150 miles, and avg 1500 to 2000 miles a week. The reason I am asking this question is the 350 seems to be losing some of its get up and go.

I know it has quite a few miles on it, but am unsure as to what would be my best route.
1. How much money do you want to spend?
2. How long are you going to keep the truck?
3. Would the engine rebuild be worth more than the truck and does the 21 year old truck have enough life left in it?

I've been in this situation before as have other guys that I know. You may be better off buying another tractor, keeping this one and fixing it later. I have regretted getting rid of every tractor that I got rid of. Should just keep them, make repairs, and keep them close to home. Good luck with your decision.
Reply With Quote
  #7  
Old 11-23-2006, 01:00 AM
Overloaded's Avatar
Member
Join Date: Sep 2006
Location: West Virginia
Posts: 80
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Default

Whether you decide to rebuild it or buy a re-man, I would consider moving up to a 400 BC. If you rebuild it, there are not many parts differences between a 350 and a 400. The pistons have a different compression ratio but, you would be changing them anyway and they should be the same price. The injectors, fuel pump calibration, and the timing key on the cam is different. That should be all you need to change, and hauling logs you could probably us the power increase.
Reply With Quote
  #8  
Old 11-23-2006, 02:50 AM
PackRatTDI's Avatar
Senior Board Member
Join Date: Mar 2006
Location: Las Cruces, NM
Posts: 1,004
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Default

Quote:
Originally Posted by Overloaded
Whether you decide to rebuild it or buy a re-man, I would consider moving up to a 400 BC. If you rebuild it, there are not many parts differences between a 350 and a 400. The pistons have a different compression ratio but, you would be changing them anyway and they should be the same price. The injectors, fuel pump calibration, and the timing key on the cam is different. That should be all you need to change, and hauling logs you could probably us the power increase.
Heck, he could probably order some of those nifty parts from Pittsburg Power and build a 700hp engine. 8)
__________________
You can take the driver out of the truck but you cant take the truck out of the driver.
Reply With Quote
  #9  
Old 11-23-2006, 09:32 PM
Papa Rick's Avatar
Board Regular
Thread Starter
Join Date: Sep 2006
Location: North Alabama
Posts: 476
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Default

Approximately how much should it cost to do the rebuild. Taking it from a 350 to a 400. I cannot afford to do this just yet, but would like to get an idea on how much I need to set aside for this including labor, and for the week I would be down.

I am not expecting an exact for sure figure, but an estimate.

This forum is so great to learn from. I really appreciate the advice and info from everyone.
__________________
Be Kind To One Another, REMEMBER: You Reap What You Sow!
Reply With Quote
  #10  
Old 11-24-2006, 12:31 PM
Papa Rick's Avatar
Board Regular
Thread Starter
Join Date: Sep 2006
Location: North Alabama
Posts: 476
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Default

Has anyone ever, or know anyone who has rebuilt a 350 big cam to a 400, and if so were you pleased with the results.
__________________
Be Kind To One Another, REMEMBER: You Reap What You Sow!
Reply With Quote
Reply





Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT. The time now is 01:31 PM.


User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.