Truck Driving Jobs

|

Trucking Jobs

|

Truck Drivers

|

Trucking Companies

 
New Users Register Free Account Here | Existing Forum Members Log In Here
Home | About Us | Contact Us | Testimonials | Spell Check

Class A Drivers.com

Application          Company Listings          Job Search        Load Board
 
  1.   Welcome to the Truck Driving Message Board - ClassADrivers.

    1. Welcome to Class A Drivers Forums

          Already registered? Login above

      OR
       
      To take advantage of all the site's features, become a member of
      the largest community of Truck Drivers.

      The advertising to the left will not show if you are a registered user.

+ Reply to Thread
Results 1 to 18 of 18

Thread: Ladder on flatbed

  1. #1
    Guest

    Default Ladder on flatbed

    Does anyone carry a ladder on there flatbed? I'm wondering if I should mount an 8' step ladder to the front of my flatbeds headboard. Anyone have any thoughts on this.

  2. #2
    Rawlco is offline Senior Board Member Rawlco is an unknown poster at this point.  Don't let him/her around power tools just yet.
    Join Date
    Jan 2006
    Location
    Central Maine
    Posts
    1,194

    Default

    I have considered a ladder. There are three things to consider:

    Height: I don't think an 8' step ladder is going to do much if you get a 13' tall load. Perhaps a 8' - 14' extention ladder would be better. I have seen these collapsible ladders at the hardware store that extend from 3 feet to 15 feet or so. I just don't think that they would hold up.

    Weight: If you weigh 200 pounds and you want to carry an 80 pound tarp up a ladder then you ought to have a ladder rated for 300 pounds. Those cheap stepladders are only rated for 200 pounds.

    Theft: How are you going to keep the ladder from being stolen when your truck is parked. Perhaps a bicycle type cable lock.

    I think that one of those Little Giant ladder systems that they advertise on TV all the time would be good, but they are kind of pricey. I think I will get one of these eventually, but I would like a locking toolbox to keep it in. I would rather not give them away to anyone with a pair of boltcutters. :wink:

    Nothing is foolproof to a talented fool.
    --------------------------------------------
    The Road goes ever on and on
    Down from the door where it began.
    Now far ahead the Road has gone,
    And I must follow, if I can,
    Pursuing it with eager feet,
    Until it joins some larger way
    Where many paths and errands meet.
    And whither then? I cannot say.

    -- J R R Tolkien

  3. #3
    brian is offline Senior Board Member brian has a checkered past and should take up chess.
    Join Date
    Jan 2005
    Location
    over here
    Posts
    1,012

    Default

    I tig welded up a little lauminum job to slide into a stake pocket on the front of my skateboard but I dont climb on a load, I just have a few pieces of rope attached to climbing clevis' that I snap onto the eyelets of my tarps, I fold it up so I can tie the first two down to the front then pull the other ones back and it opens up evenly.



    I guess you older guys might have to climb though, us youngins can still throw that 110 pound tarp on top of a 9 foot load still :wink:

  4. #4
    geomon is offline Senior Board Member geomon is an unknown poster at this point.  Don't let him/her around power tools just yet.
    Join Date
    Jul 2005
    Location
    Sacramento, CA
    Posts
    710

    Default

    I just have a few pieces of rope attached to climbing clevis' that I snap onto the eyelets of my tarps,
    Brian,
    I can't picture this...could you post a photo?

  5. #5
    mudawg is offline Member mudawg is an unknown poster at this point.  Don't let him/her around power tools just yet.
    Join Date
    Mar 2006
    Location
    New Hampshire
    Posts
    124

    Default

    I put mine ontop of the x-members in the middle of the frame rails.Out of sight out of mind to the thieves.If you get a load higher than 8ft there will more than likely be a lft there to get you up if need be.I don't pull out my ladder more then 2 or 3 times a year.
    If you think it is alright to haul for fuel money
    you are part of the problem sell your truck now
    before you hurt this industry more

  6. #6
    Maniac's Avatar
    Maniac is offline Senior Board Member Maniac is on the right path.  You could probably safely loan them a quarter.
    Join Date
    Sep 2004
    Location
    Northeast
    Posts
    956

    Default

    I carry a 5 foot stepladder, it fits on top of the toolbox which is between the spread, comes in handy and was cheap enough to buy.



    us youngins can still throw that 110 pound tarp on top of a 9 foot load

    Even though I can throw it, I let the guy with the forklift put it up there

  7. #7
    Teal 95 KW is offline Senior Board Member Teal 95 KW is an unknown poster at this point.  Don't let him/her around power tools just yet.
    Join Date
    Nov 2005
    Location
    Texas
    Posts
    660

    Default

    I've done flatbed previously, and when I get my own authority, I will do it again.

    What I believe Brian is talking about, is on the tarp where the eyelets are, attaching rope to them. Once the tarp is on the top of the load you can stand on the ground and walk from the front to the back of the trailer pulling on the rope and it will drag the end of the tarp with it.

    I'm no slouch at 6'2" 255, but even with my carrying furniture up stairs etc all day, I don't think I could throw a rolled up tarp that high. I always tossed it on a blade of the f/l and had a guy lift it up there for me.
    Save a drum......bang a trucker!


  8. #8
    brian is offline Senior Board Member brian has a checkered past and should take up chess.
    Join Date
    Jan 2005
    Location
    over here
    Posts
    1,012

    Default

    yep teals got it, their only about 10 foot lengths with clips on the ends to snap onto my tarp, I fold em up on the ground so I can pull the first two ropes and secure one half of the tarp to my skateboard then pull the other 4 and finish spreading it out, afterwards I unhook the ropes and actually secure the tarps to the load.

  9. #9
    Truckdobe is offline Board Regular Truckdobe is an unknown poster at this point.  Don't let him/her around power tools just yet.
    Join Date
    Feb 2004
    Location
    Gaffney, SC
    Posts
    235

    Default

    I have a little giant that folds up small enough to fit in the box between the spread. I only use it a few times a year but it's great to have when needed.

    I also tie short ropes to my tarps to pull them over w/out having to be on top of the freight. I can't walk on or prop a ladder against what I haul, so I have to be creative to get the tarps spread and rope and folding is the key.
    $$$$ NOT miles

  10. #10
    Maniac's Avatar
    Maniac is offline Senior Board Member Maniac is on the right path.  You could probably safely loan them a quarter.
    Join Date
    Sep 2004
    Location
    Northeast
    Posts
    956

    Default

    Quote Originally Posted by brian
    yep teals got it, their only about 10 foot lengths with clips on the ends to snap onto my tarp, I fold em up on the ground so I can pull the first two ropes and secure one half of the tarp to my skateboard then pull the other 4 and finish spreading it out, afterwards I unhook the ropes and actually secure the tarps to the load.



    How about a few pictures of this??

  11. #11
    brian is offline Senior Board Member brian has a checkered past and should take up chess.
    Join Date
    Jan 2005
    Location
    over here
    Posts
    1,012

    Default

    sure come on over and take as many as you want

  12. #12
    md_trucker05 is offline Rookie md_trucker05 is an unknown poster at this point.  Don't let him/her around power tools just yet.
    Join Date
    Oct 2005
    Posts
    14

    Default

    For my flatbed, i have the deckmate ladder....it works really well..



    Here is the website w/ more pictures and ordering information, for those that are interested...

    http://www.truckertotrucker.com/deckmate-ladder.cfm

  13. #13
    GMAN's Avatar
    GMAN is offline Administrator Board Icon GMAN is a distinguished poster and probably helps little old ladies across the street. GMAN is a distinguished poster and probably helps little old ladies across the street. GMAN is a distinguished poster and probably helps little old ladies across the street. GMAN is a distinguished poster and probably helps little old ladies across the street.
    Join Date
    Feb 2005
    Location
    Tennessee
    Posts
    15,108

    Default

    I saw a very unique ladder at a military installation where I was delivering. I believe this driver imported them from China or somewhere. He bought a number of them to sell and kept one for himself. It stretched out enough for him to get on top of a 13' load. I meant to find out where he got them, but they were rushing us to finish up so we could clear the area. These ladders folded very small yet extended out to more than 13' plus it was lightweight.

  14. #14
    Mountain Flyer's Avatar
    Mountain Flyer is offline Board Regular Mountain Flyer is an unknown poster at this point.  Don't let him/her around power tools just yet.
    Join Date
    Oct 2005
    Location
    Boise, Idaho
    Posts
    215

    Default

    Steve I have had a 7' stepladder on my truck and have used it but it's not enough. I have another extension ladder that's about 7' long (I think it's 14' extended) that I am going to replace my stepladder with this weekend. It will be much better for getting up on those high loads.

    I keep it betwen the headache rack and the cab, bungied to the headache rack. No one has stolen it. Yet. 8)
    "It is not the critic who counts,
    not the man who points out how the strong man stumbled,
    or where the doer of deeds could have done better.
    The credit belongs to the man who is actually in the arena;
    whose face is marred by the dust and sweat and blood;
    who strives valiantly; who errs and comes short again and again;
    who knows the great enthusiasms,
    the great devotions and spends himself in a worthy course;
    who at the best, knows in the end the triumph of high achievement,
    and who, at worst, if he fails, at least fails while daring greatly;
    so that his place shall never be with those cold and timid souls
    who know neither victory or defeat."

    Theodore Roosevelt

  15. #15
    Guest

    Default

    I did end up getting a 7' step ladder and mounted it to the front of the headboard. I'll see how it works out. I should have bought one of those funky ones that extends out into all different directions.

  16. #16
    LOAD IT is offline Senior Board Member LOAD IT is an unknown poster at this point.  Don't let him/her around power tools just yet.
    Join Date
    Sep 2006
    Posts
    713

    Default

    Quote Originally Posted by SteveBooth
    I did end up getting a 7' step ladder and mounted it to the front of the headboard. I'll see how it works out. I should have bought one of those funky ones that extends out into all different directions.
    Have you hauled any freight yet?? :shock:

  17. #17
    Guest

    Default

    No not yet. I start Monday, the 20th of this month. My truck is posted as available, just waiting for the phone to ring with all those offers of 3,000 mile hauls at $4.00 per mile.

  18. #18
    LOAD IT is offline Senior Board Member LOAD IT is an unknown poster at this point.  Don't let him/her around power tools just yet.
    Join Date
    Sep 2006
    Posts
    713

    Default

    Quote Originally Posted by SteveBooth
    No not yet. I start Monday, the 20th of this month. My truck is posted as available, just waiting for the phone to ring with all those offers of 3,000 mile hauls at $4.00 per mile.
    Hint: Prebook an inbound load with one of those shippers I gave you then book a broker load to get there. Just an idea. Do not rely on that broker call, however a lot of shippers will call about a posted truck, but mainly brokers peddling the cheap freight.

  19. This ad will disappear if you login

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Trucking Companies | Trucking Job Search | Online Job Application | Trucking Links | Truck Drivers Message Board | Contact Us | Site Map


Truck Driving Jobs © 2003 - 2012 ClassADrivers.com
 

Content Relevant URLs by vBSEO 3.6.0